JCEP PP compression fittings line has been designed for the conveyance of fluids at higher pressures, for drinking water conveyance, for potable h2o distribution and purposes in the thermo-hydraulic sector. This merchandise line is accordance with the most severe international specifications in phrases of mechanical houses and alimentary compatibilities.
Specialized information
JCEPs
Component |
JCEP |
Physique(A) |
Polypropylene co-polymer(PP-B) of extraordinary mechanical homes even at large temperature. |
Blocking bush(D) |
Polypropylene |
Nut(B) |
Polypropylene with dye grasp of high steadiness to UV rays andsolidity to warmth( S grade according to normal DIN54004) |
Clinching ring(C) |
Polyacetal resin(POM)with large mechanical resistance And hardness |
O Ring gasket(E) |
Special elastomeric acrylonitrile rubber(EPDM) for alimentary use |
Reinforcing ring |
AISI 430 (UNI X8Cr17,W,nr 14828)Stainless steel for feminine threads from one”to 4″ |
Functioning Pressures
JCEP PP compression fittings permits the highest doing work pressure(PN~PFA*) of sixteen bar(UNI 9562) for diameters from 16mm to 63mm and PN10 bar for diameters from 75mm to 110mm, at the temperature of 20°C.Highest allowable working pressures connected to the length of force and temperature.
Reference JCEPs
Proportions: UNI 9561
Working Stress: UNI 9562,DIN 8076-3,ISO 14236,BRL-K03.
Polyethylene(PE)pipes: UNI 7990,DIN 8074,UNI EN 12201
Threads: UNI ISO7/1,UNI EN 10026-one,ANSI ASME B1-twenty.1
Flanges: DIN 2501-1,UNI EN 1452-3.IS 7005-2
FEATURES
1. Light bodyweight, easy to load and unload
2. Good substances and drugs resistance
three. Small resistance to fluidity
4. JCEP mechanical strength
5. Good electrical insulation
6. JCEP top quality unaffected
seven. Simple installation
APPLICATION
one. Structure JCEP
two. JCEP provide system
three. for Agriculture Irrigation
OUR Solutions
one.Any inquiries will be replied inside of 24 several hours.
two.Specialist company.
3.JCEP.
four.High top quality, regular designs,reasonable&aggressive cost,fast lead time.
five.More quickly delivery: Sample will be prepared in two-3 times.
6.Shipping: We have powerful cooperation with DHL,TNT,UPS,MSK,China Delivery,etc.
1.What is your MOQ?
Our MOQ is usually 5 CTNS for size from 20-50mm.
2.What is your delievery time?
The time of delievery is around 30-45days.
three.What is your payment terms?
We accept 30% T/T in advance,70% before shipment .or 100% L/C.
4.What is the shipping port?
We ship the goods to Ningbo or Shanghai port.
5.What is the address of your company?
Our company is located in the Yuyao, ningbo Zhejiang Province,China.
You are welcomed to visit our factory.
six.How about the samples?
we could send you the samples for free, and you need to pay the courier fee.
If there are too much samples, then you also need to undertake the sample fee.