We – EPG Group the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 distinct branches. For more specifics: Mobile/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Sansung rock drilling extension rod are created with higher top quality of alloy metal bar and tungsten carbides with superior dress in resistance and influence toughness superior, by means of warmth remedy so that it can face up to the toughe EPT rock drilling requires, and transmit intense effect vitality into the rock with the lea EPT feasible loss of energy. They are commonly utilized in all varieties of mining, drilling, quarrying, engineering, construction, water well drilling, oil exploring industries etc.
Extension rod:
EPT names are Extension drill metal, Extension drill rod, and Extension metal, M/Frod (Pace rod), generate Hexagonal and spherical cross-sections,Hexagonal rods are much more rigid, heavier and transfer energy a lot more effectively,while escalating flushing. Spherical rods are normally lighter than hexagonal rodsand are generally utilised in extension drilling applications. With the more time steel tending to be more substantial in diameter, typical extension steel is characterizedby duplicate thread on each and every end of the metal.
Extension rods are created by hollow drill steels, distinct lengths are offered from 600mm to 6400mm. This hollow hole are usually named flushing gap, utilised for transmitting drinking water or air for the duration of drilling. And the threads can be utilised for connecting couplings, shanks adapters or bits.
Male/Woman (M/F) rod, pace rod:
M/F drill steel is an different to couplings sleeves to contain the female component of the threaded connection as an integral portion of the drill steel. M/F drill steel gives much more rigid connections and is simpler to uncouple and take care of. The service daily life also tends to be greater than with separate couplings. The rewards of drilling with M/F steel incorporate: effortless managing, faster uncoupling, tighter connections, the prospective to drill straighter holes, and more time provider daily life.
For extension rod and M/F metal method, the beneath two distinct sorts of warmth treatment method are used to reinforce high velocity and effective percussive drill string parts to improve their overall performance and reliability. Lengthier metal larger in diameter, traditional extension metal, Hexagonal and round cross sections are available.
Carburizationis a method employed to harder the total rod surface equally internally and externally to reinforce and extend the life of the rod.
High frequency induction is approach in which only the thread finishes of the rod are hardened to lengthen thread lifestyle.
R32 thread:
Extension rods, R32-Round32-R32, length915mm/1000mm/1220mm/1830mm/2435mm/3050mm/3660mm
M/F rods, R32-Round32-R32, duration 915mm/1220mm/1525mm/1830mm/2435mm/3050mm/3660mm
Xihu (We EPT Lake) Dis. speed rods, R32-Round39-R32, duration 3050mm/3660mm
Xihu (We EPT Lake) Dis. tube, R32-Round46-R32, length 1220mm/1525mm/1830mm/3050mm
T38 thread:
Extension rods, T38-Round39-T38, length1220mm/1525mm/1830mm/2435mm/3050mm/3660mm/3965mm/4270mm/4880mm/5530mm/6095mm
Double thread extension rods, T38-Round39-T38, length 3050mm/3660mm
MF rods, T38-Round39-T38, length915mm/1220mm/1525mm/1830mm/3050mm/3660mm/4270mm/4880mm/5530mm/6095mm
Xihu (We EPT Lake) Dis. velocity rods, T38-Round46-T38, length 1830mm/3050mm/3660mm/4270mm/4880mm/5530mm/6095mm
Xihu (We EPT Lake) Dis. tube, T38-Round56-T38, size 1220mm/1525mm/1830mm/3050mm/3660mm/4920mm
Hex extension rods, T38-Hex32-T38, length 1220mm/1830mm/2435mm/3050mm/3660mm
T45 thread:
Extension rods, T45-Round46-T45, length 1830mm/2435mm/3050mm/3660mm/4270mm/5530mm/6095mm
MF rods, T45-Round46-T45, length1525mm/1830mm/3050mm/3660mm/4270mm/5530mm/6095mm
Xihu (We EPT Lake) Dis. speed rods, T45-Round52-T45, size 3050mm/3660mm/4270mm/5530mm/6095mm
Xihu (We EPT Lake) Dis. tube: T45-Round64-T45, duration 1220mm/1525mm/1830mm/3050mm/3660mm
Xihu (We EPT Lake) Dis. tube: T45-Round76-T45, length 1830mm/3660mm
T51 thread:
Extension rods, T51-Round52-T51, length3050mm/3660mm/4270mm/4880mm/5530mm/6095mm
MF rods, T51-Round52-T51, length1525mm/1830mm/3050mm/3660mm/4270mm/4880mm/5530mm/6095mm
Xihu (We EPT Lake) Dis. rods, T51-Round76-T51, size 1830mm/3660mm
Xihu (We EPT Lake) Dis. tube, T51-Round87-T51, duration 3660mm
T60 thread:
MF rods, T60-Round60-T60, size 3660mm/4265mm/6095mm
R25 (1″)
MM HEX Extension rod
Rod segment 24.8mm
Length (mm) | Element No. Entirely carburized. | Part No. Floor hardened | Bodyweight approx (kg) |
1220 3050 |
202-5712-C,02 202-5711-C,02 |
three.7 ten.1 |
MM HEX Extension rod
Rod segment 28.5mm
Size (mm) | Component No. Entirely carburized. | Component No. Surface hardened | Excess weight approx (kg) |
915 a thousand 1220 1525 1830 2435 3050 |
202-0309-C,02 202-571-C,02 202-571-C,02 202-571-C,02 202- 0571 -C,02 202-0324-C,02 202-0331-C,02 |
202-0331-SH,03 |
3.3 three.9 4.5 five.seven six.9 nine.two eleven.9 |
MF HEX Speedrod
Rod segment 28.5mm
Length (mm) | Part No. Completely carburized. | Element No. Area hardened | Weight approx (kg) |
610 1220 |
202-0306-MF-C,02 202-571-MF-C,02 |
2.six 5. |
R28 (1one/eight“)
MM HEX Extension rod
Rod segment 32mm
Duration (mm) | Part No. | Bodyweight approx (kg) |
3050 | 207-571-C,02 | 15. |
MF HEX Speedrod
Rod segment 32mm
Duration (mm) | Portion No. | Excess weight approx (kg) |
3050 | 207-571-MF-C,02 | 15,seven |
R32 (oneone/4“)
MM Round Extension rod
Duration (mm) | Portion No. Totally carburized. | Component No. Surface hardened | Fat approx (kg) |
915 one thousand 1220 1830 2435 3050 3660 |
203-2509-C,02 203-2510-C,02 203-2512-C,02 203-2518-C,02 203-2524-C,02 203-2531-C,02 203-2537-C,02 |
203-2524-SH,03 |
4.eight 5.seven 6.five nine.eight 13.two sixteen.6 20. |
MF Spherical Extension Rod
Size (mm) | Portion No. Fully carburized. | Element No. Surface area hardened | Weight approx (kg) |
915 1220 1525 1830 2435 3050 3660 |
203-2509-MF-C,02 203-2512-MF-C,02 203-2515-MF-C,02 203-2518-MF-C,02 203-2524-MF-C,02 203-2531-MF-C,02 203-2537-MF-C,02 |
5.5 seven.3 9. ten.6 14. seventeen.1 20.7 |
MF Spherical Speedrod
Size (mm) | Component No. Completely carburized. | Portion No. Floor hardened | Excess weight approx (kg) |
1830 3050 |
203-2518-MF-90-C,02 203-2531-MF-90-C,02 |
11.5 19.three |
MM Spherical Drifter rod
Duration (mm) | Part No. | Fat approx (kg) |
4000 4310 |
203-2540-03-C,02 203-2543-03-C,02 |
22. 24.8 |
MF Spherical Xihu (We EPT Lake) Dis. rod
Length (mm) | Element No. | Fat approx (kg) |
3050 3660 |
203-4731-MF-C,02 203-4737-MF-C,02 |
27. 32. |
R/T38 (1one/2“)
MM Hex Extension rod
Rod segment 35.8mm
Size (mm) | Portion No. R38 thread | Element No. T38 thread | Excess weight approx (kg) |
1220 3050 |
235-571-C.02 235-571-C.02 |
eight.four eighteen.7 |
MF Round Speedrod
Length (mm) | Part No. R38 thread | Portion No. T38 thread | Excess weight approx (kg) |
915 1220 1525 1830 3050 3660 4270 4880 5530 |
235-4709-MF-C.02 235-4712-MF-C,02 235-4715-MF-C,02 235-4718-MF-C,02 235-4731-MF-C,02 235-4737-MF-C,02 235-4743-MF-C,02 235-4749-MF-C,02 235-4755-MF-C,02 |
eight.3 10.nine thirteen.3 fifteen.8 twenty five.5 30.five 35.four 41.9 forty six.9 |
MM Spherical Speedrod
Area hardened.
Duration (mm) | Part No. R38 thread | Portion No. T38 thread | Excess weight approx (kg) |
1830 2435 3050 3660 3965 4270 |
204-2718-SH,03 204-2724-SH,03 204-2731-SH,03 204-2737-SH,03
|
235-2731-SH,03 |
fourteen.eight 19.five 24.three 30. 32.5 33.nine |
Fully carburized.
Size (mm) | Portion No. R38 thread | Portion No. T38 thread | Bodyweight approx (kg) |
280 1220 1525 1830 3050 |
204-2702-C.02
|
235-2712-C,02 235-2715-C,02 235-2718-C,02 235-2731-C,02 |
two. ten. 12.5 14.4 24. |
MM Round Double Thread Extension Rod
Duration (mm) | Element No. R38 thread | Component No. T38 thread | Weight approx (kg) |
3050 3660 |
235-2731-ninety five-SH,03 235-2737-ninety five-SH,03 |
23.eight thirty. |
Drifter rod
For a single rod drilling drifter rods can be utilised.
MF Xihu (We EPT Lake) Dis. Speedrod
Length (mm) | Element No. T38 thread | Bodyweight approx (kg) |
1830 3050 3660 |
235-4918-MF-C,02 235-4931-MF-C,02 235-4937-MF-C,02 |
21.1 34.five forty one.three |
Xihu (We EPT Lake) Dis. tube
Hole diameter (mm) | Tube diameter (mm) | Size(mm) | Element No. | Excess weight approx (kg) |
sixty four 64 64 64 sixty four sixty four 76 |
fifty six fifty six 56 56 fifty six 56 64 |
1220 1525 1830 3050 3660 4920 3660 |
235-7012,ten 235-7015,ten 235-7018,ten 235-7031,ten 235-7037,ten 235-7049,10 235-6937,10 |
twelve.6 14. 17.4 28.three 32.eight forty seven.9 51. |
T45 (1three/four“)
MM Hex Extension rod
Rod segment forty two.6mm
Length (mm) | Component No. Fully carburized. | Part No. Floor hardened | Weight approx (kg) |
3050 3660 |
236-571-C,02 236-571-C,02 |
25.six thirty.eight |
MM Spherical Extension Rod
Duration (mm) | Portion No. Totally carburized. | Portion No. Area hardened | Excess weight approx (kg) |
3050 3660 4270 6095 |
236-2931-SH,03 236-2937-SH,03 236-2943-SH,03 236-2961-SH,03 |
33.three 39.nine forty six.seven 68.9 |
MF Round Speedrod
Duration (mm) | Portion No. Entirely carburized. | Element No. Surface hardened | Weight approx (kg) |
1525 1830 3050 3660 4270 6095 |
236-4915-MF-C,02 236-4918-MF-C,02 236-4931-MF-C,02 236-4937-MF-C,02 236-4943-MF-C,02 236-4961-MF-C,02 |
eighteen.two 21.5 34.seven 41.6 49. sixty nine. |
MF Xihu (We EPT Lake) Dis. rod
Length (mm) | Part No. | Weight approx (kg) |
3660 | 236-5137-MF-C,02 | 55. |
Xihu (We EPT Lake) Dis. tube
Gap diameter (mm) | Tube diameter (mm) | Size(mm) | Part No. | Excess weight approx (kg) |
seventy six seventy six seventy six seventy six 89 89 |
sixty four sixty four sixty four sixty four 76 76 |
1220 1525 1830 3660 1830 3660 |
236-6912,10 236-6915,ten 236-6918,ten 236-6937,10 236-6618,10 236-6637,ten |
20. 21.6 twenty five.four forty nine. 40. seventy seven.eight |
T51 (2″)
MM Round Extension rod
Length (mm) | Portion No. Totally carburized. | Component No. Floor hardened | Bodyweight approx (kg) |
3660 6095 |
237-3137-SH,03 237-3161-SH,03 |
52.three 84. |
MF Round Speedrod
Length (mm) | Portion No. Entirely carburized. | Element No. Surface area hardened | Excess weight approx (kg) |
1830 3660 4270 6095 |
237-5118-MF-C,02 237-5137-MF-C,02 237-5143-MF-C,02 237-5161-MF-C,02 |
27.5 fifty one.eight 64. eighty five.six |
Xihu (We EPT Lake) Dis. tube
Gap diameter (mm) | Tube diameter (mm) | Size(mm) | Part No. | Weight approx (kg) |
89 89 102 |
seventy six seventy six 87 |
1830 3660 3660 |
237-6618,10 237-6637,10 237-6837,10* |
forty. 79.one 80. |
We – EPG Team the bigge EPT gearbox & motors , vee pulleys, timing pulleys, couplings and gears factory in China with 5 different branches. For much more specifics: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828 The use of authentic products manufacturer’s (OEM) component figures or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating merchandise use and compatibility. Our business and the outlined alternative elements contained herein are not sponsored, approved, or made by the OEM.